How to Trace an IP Address in 2022 [Steps & Tools for Tracing]


How to Trace an IP Address in 2022 [Steps & Tools for Tracing]

The internet is big and busy, so if you want your traffic to end up in the right place, your device needs to know where to send it. Normally it uses an identifier, called an IP address, and you can use this to get a lot of information, including where your data is actually going. In this article, we’ll show you how to trace an IP address, so you can track your information to any specific location in the world.

Key points to remember:

  • Computers use an IP address to know where to send information.
  • Most websites use a fixed IP address, which any device can ping or trace.
  • Emails contain the sender’s IP address at the time they sent a message.
  • You can discover the IP addresses of proxies and other servers via the “tracert” command.

Data can go through several “hops”, so you may need to trace an IP address to know where your data is going. When you have the specific IP addresses where your information is being sent, you can find that location through an online database.

Tracking an IP address not only tells you where your data is going, but also the location of another internet user and if the data is going somewhere, it shouldn’t. It can even help you troubleshoot a bad connection to a host. Tracing an IP address will see through most proxies, but remember that even a free VPN can hide the host’s IP address and location.

  • IP is short for “internet protocol” and an IP address is the number assigned to your device. This allows all internet traffic to find your device, and is an essential part of any online communication.

  • Yes. As long as the device is on, connected to yours, and no proxy or VPN server is hiding it, you can track the IP address. If you want to find the IP address of a device you are connected to, you can use the “netstat -an” command in the command prompt. This will give you a list of all devices that communicate with yours.

  • Yes. The same way you can track other people’s IP addresses, they can track your device’s IP addresses. Obviously, this is a privacy issue for some people, so if you want to hide your IP address information, you should use a Virtual Private Network (VPN).

  • Tracing an unprotected IP address is as easy as a single line in the command prompt. However, if someone has masked or obscured their IP address with a decent VPN service, you will just receive an error and get no information. In this case, the only reasonable option you have is to wait for them to disable the VPN.

  • The best way to track IP addresses is to use the command prompt – we’ve got instructions below. You can also track and IP address via email.

How to Trace an IP Address Using Command Prompt

Tracing an IP address is a good way to know where your data packets are going. It will give you the IP addresses of every device connected to your computer, which you can then use to get information, like approximate longitude and latitude or ISP.

The easiest way to do this is to use the “tracert” command in the command prompt. You can also find the IP address of any website while you are there.

  1. Open the command prompt

    First, press the the Windows key and the “R” button. Then type “cmd” in the text box that appears and click “OKAY.”

    trace website ip command prompt
  2. Ping the website you want to track

    Type “ping” followed by Website URL to get its IP address.

    trace website ip ping website
  3. Run the “Tracert” command on the IP

    the “Trace” The command allows you to see which locations your data goes through.

    trace website IP address trace route
  4. Put these IP addresses into an IP lookup tool

    Websites like What is my IP address allow you to find the approximate location of any IP address.

    trace website ip address finder tool

How to Track IP Address by Email

If you’re looking to trace an individual’s IP address, or just want to check where that dubious email is coming from, you might want to trace their email IP address.

  1. Open raw email data

    Choose the option that says something like “open raw email” Where “see the original.”

    trace email ip raw message
  2. Find the IP address

    In the raw email data, there will be multiple IP addresses. You should check each of them.

    trace e-mail ip find address
  3. Put these IP addresses into an IP lookup tool

    You can now put these addresses in any research tool to find the country of the sender.

    email trace ip address lookup tool

Final Thoughts: How to Run an IP Trace

While you probably won’t need to trace an IP address on an average day, it’s useful to know what tools other people can access. It’s very possible that without a good VPN, someone could pick up information like a rough estimate of your location and ISP.

Tracking an IP address can also be a great tool if you’re concerned about your online privacy or have trouble logging into a website. After all, being able to know where your data actually goes is the first step to hiding your IP address and controlling where the data goes in the future.

Have you ever tracked an IP address? Have you used these methods? Do you have any other suggestions? Let us know your thoughts in the comments section below. Thanks for reading.

Let us know if you liked the post. This is the only way to improve ourselves.




Comments are closed.